Filter
Top Products
34. Remove the preettached 3 1/2" Pulleys (78) from
the Double "U"-bmcket (62).
Wrap the ButterflyCable (69) under a 3 1/2" Pulley
(78). Attachthe Pulleyto the Double "U"-bracket
(62) with a 3/8" x 1 3/4" Bolt (93) and a 3/8" Nylon
Locknut (67).
35. Wrap the ButterflyCable (69) over a "V'-pulley (55).
Attach the Pulleyand a Long Cable Trap (102) to
the other bracket on the ButterflyUpright(3) with a
318"x 2 1/2" Bolt (18) and a 3/8" Nylon Locknut
(87). Make sure that the Long Cable Trap Is
turned to hold the Cable In the groove of the
Pulley.
36. Attachthe ButterflyCable (69) to the Pivot Bracket
(70) on the Right ButterflyArm (26) with a 5/16" x 1"
Shoulder Bolt (103) and a 5/16" Nylon Locknut(86).
37. Locate the Leg Lever Cable (75), which Is 98 1/2"
long and has an eyelet on one end end e thread-
ed pin on the other end. Routethe eyelet end of
the Cable throughthe Seat Upright(9) and attachit
to the tab on the Leg Lever (10) witha 5/16" x 1"
Shoulder Bolt (103) and a 5/16" Nylon Locknut(86).
38. Attach a 3 1/2" Pulley (78) insideof the Seat
Upright(9) with a 3/8" x 2 3/4" Bolt (101), two 3/8"
Washers (91), two 1/2" Spacers (89), and a 3/8"
Nylon Looknut (87), as shown.
38
91
89
,101
15