Filter
Top Products
29. Wrap the Lat Cable (88) around a 3 1/2" Pulley
(78). Attach the Pulley and a Long Cable Trap (102)
to the TopFrame (6) with a 318"x 1 314"Bolt (93)
and a 318"NylonJamnut (113). Make sure the
Cable Trap Is turned to hold the Cable In the
groove of the Pulley.
30. Remove the preattached 3 1/2" Pulleys (78) from
the Pulley Plates (63)°
Wrap the Lat Cable (86) arounda 3 1/2" Pulley
(78). Attach the Pulley and a Cable Trap (68) to the
second set of holesfrom the top of the Pulley
Plates (63) with a 3/8" x 2" Bolt(100) and a 318"
Nylon Locknut (87). Make sure the Cable Trap Is
turned to hold the Cable In the groove of the
Pulley.
31. Attach the end ofthe Lat Cable (88) inside of the
ButterflyTopFrame (7) witha 5/16" x 2 1/2" Bolt
(59), two5/16" Washers (90), and a 5/16" Nylon
Locknut(86).
32. Locate the Butterfly Cable (69), which Is the
shortest Cable. Attach the Cable tothe Pivot
Bracket (70) on the LeftButterflyArm (25) with a
5/16" x 1" Shoulder Bolt(103) and a 5/16" Nylon
Locknut(86).
33. Wrap the ButterflyCable (69) over a _V"-pulley (55).
Attach the Pulley and a LongCable Trap (102) to
the indicatedbracket on the ButterflyUpright(3)
with a 3i8" x 2 112"Bolt (18) and a 3/8" Nylon
Locknut(87). Make sure that the Long Cable
Trap is turned to hold the Cable in the groove of
the Pulley.
29
/
78
68V'
31 _90
90
/59
32
103
102
14