Filter
Top Products
7
Getting Started
PART 1
CLEANING
• Clean with soap and water cleaners only.
• Never use solvents on plastic parts.
ASSEMBLY
If you have elected to assemble this product yourself, for your safety please read and follow each of
the steps in the enclosed assembly instructions. It is recommended, when possible, that assembly be
performed by an authorized Vision Fitness dealer. If you have any questions regarding any part or func-
tion of your Elliptical Trainer, contact your dealer.
MOVING YOUR VISION FITNESS ELLIPTICAL TRAINER
Your Vision Fitness Elliptical Trainer has a pair of transport wheels built into the front legs. It is easy to
move your Elliptical Trainer by rolling it on the front transport wheels.
PLACEMENT IN YOUR HOME
It is important that you place your Vision Fitness Elliptical Trainer in a comfortable and inviting room.
Your Elliptical Trainer is designed to use minimal floor space. Many people will place their Elliptical
Trainers facing the TV or a picture window. If at all possible, avoid putting your Elliptical Trainer in an
unfinished basement. To make exercise a desirable daily activity for you, the Elliptical Trainer should be
in an attractive setting.
Occasionally after long term use you will find a fine black dust below your Elliptical Trainer. This is
normal wear from the drive belt and DOES NOT mean there is anything wrong with your Elliptical
Trainer. This dust can be easily removed with a vacuum cleaner. If you wish to prevent this dust from
getting on your floor or carpet, place a rubber or vinyl mat beneath your Elliptical Trainer.
LEVELING THE PEDAL ARM GUIDE RAILS
If your Elliptical Trainer wobbles when you have placed it where you intend to use it, raise or lower
one or both of the adjustable levelers located on the bottom of the guide rails. Once you have leveled
the Elliptical Trainer, lock the levelers in place by tightening the winged lock nuts against the guide rail.
POWER SUPPLY
(MODELS X6200 & X6200HRC)
Your Elliptical Trainer uses a wall mount external power supply. Only use the power supply supplied
with your trainer. If you misplace this power supply, please contact your authorized Vision Fitness dealer
for an original replacement. Use of the wrong power supply may cause damage to your Elliptical
Trainer.