Filter
Top Products
45
GENERAL
USER ENGINEERING MODE
(Models T9700S & T9700HRT Only)
Your treadmill offers a User Engineering Mode that can access certain
data and help to troubleshoot your treadmill. User Engineering Mode is
designed for you to access functions that will not affect important treadmill
settings. To access this mode please hold down SPEED DOWN and
SELECT for 5 seconds while the treadmill is in any state of setting up a
program. When in the User mode, "USER MODE" displays in the
alphanumeric window. To access the data press the ELEVATION keys to
scroll through the available data/functions. To select the data/function,
press START. To exit, press STOP.
UNITS
P6 represents units, English or Metric. You can select this configuration for
your treadmill.
The treadmill configuration appears in the alphanumeric window. If an "E"
is shown, the treadmill is configured in English units (miles/mph); "M"
represents a Metric configuration (kilometers/kph). Press the SPEED arrows
to toggle between English and Metric.
In order to save the modified value, press SELECT. Note that changing
units does affect the stored value of weight and clears any stored user
programs. Changing units may also require you to perform
auto-calibration.
DEFAULT WEIGHT
P8 represents default weight. Weight appears in the right window. To
modify weight, press the SPEED arrows. To save the new default weight,
press SELECT prior to exiting. If Units is modified immediately prior,
weight defaults to 150 lbs. or 68 kg.
ACCUMULATED TIME
P9 represents accumulated time, in hours. The SPEED keys are disabled
while viewing. To exit, press STOP. This information can not be modified.