Filter
Top Products
GB
3
OWNER'S MANUAL
•
E60R
•
Make sure the equipment is unplugged
before carrying out any assembly or
maintenance procedures.
•
Do not attempt any servicing or
adjustments other than those described
in this guide. Everything else must
be left to someone familiar with the
maintenance of electromechanical
equipments and authorised under the
laws of the country in question to carry
out maintenance and repair work.
•
This product must be grounded. If
it should malfunction or breakdown,
grounding provides a path of least
resistance for electric current to reduce
the risk of electric shock. This product
is equipped with a cord having an
equipment-grounding conductor and
a grounding plug. The plug must be
plugged into an appropriate outlet that
is properly installed and grounded in
accordance with all local codes and
ordinances.
DANGER: Improper connection of the
equipment-grounding conductor can
result in a risk of electric shock. Check
with a qualified electrician or serviceman
if you are in doubt as to whether the
product is properly grounded. Do not
modify the plug provided with the
product - if it will not fit the outlet, have
a proper outlet installed by a qualified
electrician.
SAVE THIS INSTRUCTION MANUAL
WELCOME TO THE WORLD
OF TUNTURI EXERCISING!
Your choice shows that you really want to invest in
your well being and condition; it also shows you
really value high quality and style. With Tunturi
Fitness Equipment, you’ve chosen a high quality,
safe and motivating product as your training
partner. Whatever your goal in training, we are
certain this is the training equipment to get you
there. You’ll find information about using your
exercise equipment and what makes for efficient
training at Tunturi’s website at
WWW.TUNTURI.COM.
ASSEMBLY
Open the transport package on its side. Take the
parts out of the package and make sure the package
includes all the following parts:
1. Front frame
2. Lower frame
3. Seat frame
4. Seat (2 pcs)
5. Handlebar
6. Meter
7. Feet (2 pcs)
8. Pedals (2 pcs)
9. Assembly kit (contents marked with in the spare
part list): keep the assembly tools, as you may need
them e.g. for adjusting the equipment.
If necessary, please contact your dealer with the
model, equipment serial no. and spare part no.
of the missing part. You’ll find a spare part list at
the back of this guide. The packaging includes a
silicate bag for absorbing moisture during storage
and transportation. Please dispose of the bag once
you have unpacked the equipment. The directions
left, right, front and back are defined as seen from
the exercising position.
HANDLEBAR ASSEMBLY AND SEAT
(version without hand grip pulse) Remove the seat
fastening nuts. Place the seat upside down, for
example, on a chair. Place the handlebar, the spacer
bar and the seat frame upside down on the bottom
of the seat. Fasten the handlebar and seat to the
seat frame with nuts.
HANDLEBAR ASSEMBLY AND SEAT
(version with hand grip pulse) Remove the seat
fastening nuts. Place the seat upside down, for
example, on a chair. Place the handlebar, the spacer
bar and the seat frame upside down on the bottom
of the seat.
NOTE ! Do not damage the hand grip
pulse wires. Fasten the handlebar and seat to the
seat frame with nuts. Attach the hand grip pulse
wires to the transmitter box and push the extra
wire length inside the handlebar. Detach the lid of
the transmitter box, insert batteries (3xAAA) and
close the lid.