Filter
Top Products
37
Shortcuts:
The third row shows alternatively the bearing, speed, average speed or memory
status. Change the displayed information with
Stop/Cancel
. You can select a shortcut
from the Sailing or Racing Data display to replace the average speed.
• Bearing (bea): Displays the bearing to the next waypoint
in degrees.
• Speed (spd): Displays the vessel’s speed in the selected
unit.
• Average speed (avg): Display’s the vessel’s average
speed in knots.
• Memory status (mem): Displays the percentage of free
memory space.
If the GPS is
off
, the shortcuts display the latest values when
the GPS was
on
.
When Navigate is
off
but the GPS is
on
, the shortcut values refer to the starting point
where the GPS had its initial fix.
NOTE: A rectangular indicator is displayed on the left side of the lower horizontal
dotted line of the display when Navigate is on.
Navigation Data display
The Sailing, Navigation and Racing modes and the MOB function have special informa-
tion displays that you can access from the main display of the respective mode. The
Navigation data display shows either Waypoint information or a summary of the route.
To activate the display, press
Start/Data
in the Navigation display.
When Navigation is
on
, the Navigation Data display shows Waypoint information on
four rows:
Route: The first row displays the name of the route.
Waypoint: The second row displays the name and number
of the waypoint being navigated. You can scroll the waypoints
with the arrow buttons. Long press
Enter
to activate the
selected waypoint. Suunto M9 begins displaying the naviga-
tion data to the new waypoint. The active waypoint is indi-
cated with reversed color symbol.