Filter
Top Products
20
5. When you press the down arrow button, the seconds are zeroed. If you want to set
specific seconds, press the up arrow button and the seconds start running. When
the settings are correct, short press
Enter
. The
date
selection is activated.
6. Change the
date
with the arrow buttons and short press
Enter
. The
month
selection
is activated.
7. Change the
month
with the arrow buttons and short press
Enter
. The
year
selection
is activated.
8. Change the
year
with the arrow buttons and short press
Enter
. You automatically
return to the Set menu.
NOTE: When you set the seconds for the time, they are automatically updated in the
dual time as well.
3.2.6 General
The General function includes the general settings for using
your Suunto M9.
Setting the light
Light means the backlight of the Suunto M9 display. Light has
three possible settings:
• Normal: The light switches on when you press
Start/Data
for more than 2 sec-
onds. The light is on for 5 seconds after the last press of any button.
• Off: The light does not switch on from any button.
• Night Use: The light switches on when you press any of the buttons and stays on
for 5 seconds after the last press of a button.
To change the light setting:
1. In the Set menu, scroll to
General
and short press
Enter
.
The General menu is displayed.
2.
Light
is already the first menu item. Short press
Enter
to
select it. The current light setting is displayed in reversed
color.
3. Select the suitable light setting with the arrow buttons and
short press
Enter
. The light settings are now ready and
you return to the Set menu.