Filter
Top Products
36
3.5.5 Race
When you select
Race
, Suunto M9 switches into the Racing
mode. (For more information on the Racing mode, see page
43.)
To select the Racing mode:
1.In the Set menu, scroll to
Race
and press
Enter
. The On/Off
selection is activated.
2.Set the race function
On
with the arrow buttons and press
Enter
. The Racing mode is activated and you return to the
Sailing menu.
3.6 NAVIGATION MODE
3.6.1 Main Display
When you select the Navigation mode, the main display opens.
Suunto M9 displays the direction to the destination with a
circle on the outer rim of the display.
The upper part of the
display shows fixed sighting marks and a bearing indicator
represented by a circle. When the bearing indicator is inside
the sighting marks, you are moving in the direction of the set
bearing.
The bearing indicator moves in a 120-degree arc in the upper part of the display. If the
direction of the unit deviates more than this from the tracked bearing, the unit prompts
the direction where to turn the unit with arrows. Once the circle appears on top of the
display, the accurate bearing can be tracked again.
The main display has three rows:
Waypoint/Route: When Navigate is
on
, the first row displays the name and number
of the navigated
waypoint
. If Navigate is
off
, the name of the activated
route
is dis-
played.
Heading/Length: When Navigate is
on
, the second row displays the heading in
degrees. If Navigate is
off
, the total length of the activated route is displayed.
NOTE: If the GPS is off the unit always displays the selected route and total length.