Filter
Top Products
-10-
M1036 Micro Mill
SET UP
NOTICE
When ordering replacement parts, refer
to the parts list and diagram in the back
of the manual.
The following is a description of the main components
shipped with the
SHOP FOX
®
Model M1036. Lay the
components out to inventory them.
Box 1 Contents (Figure 3) Qty
A. Headstock ...................................................1
B. Collar ........................................................1
C. Spacer .......................................................1
D. Base with Column .........................................1
E. Downfeed Lever Handle ..................................1
F. Column Lock Knob .........................................1
G. Fence ........................................................1
Box 1 Tools and Hardware (Not Shown) Qty
• Phillips Head Screwdriver ................................1
• Hex Wrenches 2, 2.5, 3, 4mm ................... 1 Each
• Open End Wrench 5.5/7mm ............................1
• Chuck Removal Wedge ...................................1
• Round Belt ..................................................1
• Cap Screw M5-.8 x 12 .....................................1
• Square Nut M5-.8 ..........................................1
Box 2 Contents (Figure
4) Qty
H. Compound Slide Table ....................................1
I. Handwheel Handles ......................................2
Box 2 Hardware (Not Shown) Qty
• T-Bolts M6-1 x 22 ..........................................4
• T-Nuts M6-1 ................................................4
• Hex Nuts M6-1 ..............................................2
• Flat Washers 6mm .........................................2
If any parts appear to be missing, examine the packag
-
ing carefully to be sure those parts are not among the
packing materials. If any parts are missing, find the
part number in the back of this manual and contact
Woodstock International, Inc. at (360) 734-3482 or at
tech-support@shopfox.biz
Inventory
Figure 3. Box 1 contents.
Figure 4. Box 2 contents.
A
B
C
D
F
E
H
I
G