Filter
Top Products
-9-
M1036 Micro Mill
SET UP
The SHOP FOX
®
Model M1036 has been carefully pack-
aged for safe transporting. If you notice the machine has
been damaged, please contact your authorized
SHOP
FOX
®
dealer immediately.
READ and understand this
entire instruction manual
before using this machine.
Serious personal injury
may occur if safety and
operational information
is not understood and fol-
lowed. DO NOT risk your
safety by not reading!
Unpacking
SET UP
SUFFOCATION HAZARD!
Immediately discard all plastic bags and
packing materials to eliminate suffoca
-
tion hazards for children and animals.
UNPLUG power cord
before you do any assem
-
bly or adjustment tasks!
Otherwise, serious per
-
sonal injury to you or
others may occur!
The following items are needed, but not included, to
setup your machine:
• Safety Glasses (for each person) ........................1
• Solvent ......................................................1
• Shop Rags ...................................................1
• Wrench or Socket 10mm .................................1
• Ruler .........................................................1
Bench Mounting Hardware (Optional)
• Precision Level .............................................1
• Phillips Head Screw 6mm x Length Varies ............2
• Hex Nut 6mm ..............................................2
• Flat Washer 6mm ..........................................
2
• Metal Shim Stock ..........................................1
• Drill and 6mm Bit ..........................................1
Items Needed for Set Up