THE mNFORMATmONMODE/DEMO MODE THE OPTmONAL CHEST PULSE SENSOR
The consob features an information mode that keeps
track of the totaUnumber of hours that the treadmHUhas
been operated and the totaUnumber of miles that the
waUkingbeUthas moved, The information mode aUsoaP
bws you to sebct miles or kilometers as the unit of
measurement and to turn on and turn off the demo
mode,
To sebct the information mode, hoUddown the Stop
button while inserting the key into the consob, When
the information mode is sebcted, the following informa-
tion wHUbe shown in the dispUay:
The bft side of the display
will show the total number of
miles (or kilometers) that the
walking belt has moved and
the total number of hours
that the treadmill has been
E
Milels _Hours
used, An "E" for english miles or an "M" for metric kilo°
meters wiii appear in the right side of the display, Press
the Speed + button to change the unit of measurement,
IMPORTANT: if a "d" appears in the right side of the
display, the console is in the "demo" mode, This mode
is intended to be used only when a treadmill is dis-
played in a store, When the console is in the demo
mode, the power cord can be plugged in, the key can
be removed from the console, and the indicators in the
display will automatically appear in a preset sequence,
although the buttons on the console will not operate, If a
"d" appears when the information mode is seJected,
press the Speed - button so "d" disappears,
To exit the information mode, remove the key from the
console,
An optional chest pulse sensor adds even more fea-
tures to the console, The chest pulse sensor offers
hands-free operation, and enables you to use the con-
sob's two heart rate programs, To purchase the op-
tionaJ chest pulse sensor, call toil-free 1-888-533-
1333,
HOW TO LEVEL THE TREADMILL
if the treadmill wheels are touching the floor or if the
treadmill rocks slightly, turn one or both of the leveling
feet under the upright base until the wheels are off the
floor and the rocking motion is eliminated, Note: if nec°
essary, tip the treadmill and use a phillips screwdriver
to turn the leveling feet,
Feet
2O