OPERATmON AND ADJUSTMENT
THE PRE-LUBRmCATED WALKmNG BELT
Your treadmHUfeatures a waUking beUtcoated with high-
performance Uubrbant, IMPORTANT: Never apply sil-
icone spray or other substances to the walking
belt or the walking platform. Such substances will
deteriorate the walking belt and cause excessive
wear.
HOW TO PLUG mNTHE POWER CORD
DANGER: Improperconnection
of the equipment-grounding conductor can
result in an increased risk of electric shock.
Check with a qualified electrician or service-
man if you are in doubt as to whether the
product is properly grounded. Do not modify
the plug provided with the product--if it will
not fit the outlet, have a proper outlet
installed by a qualified electrician.
Your treadmill, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your home's power,
Voltage surges, spikes, and noise interference can
result from weather conditions or from other appliances
being turned on or off, To decrease the possibility of
your treadmill being damaged, always use a surge
suppressor with your treadmill (see drawing 1 at
the right}. To purchase a surge suppressor, see
your Jocal Sears store or call 1-800-366-7278 and
order part number 146148, or see your tocal elec-
tronics store.
Use onJy a singJe-ouflet surge suppressor that is
UL 1449 tisted as a transient vottage surge sup-
pressor (TVSS}. The surge suppressor must have a
UL suppressed voltage rating of 400 volts or tess
and a minimum surge dissipation of 450 joules.
The surge suppressor must be electrically rated
for 120 volts AC and 15 amps. There must be a
monitoring light on the surge suppressor to indi-
cate whether it is functioning property. Failure to
use a properly functioning surge suppressor could
result in damage to the controJ system of the
treadmill. If the controJ system is damaged, the
walking beJt may change speed or stop une×pect-
edty, which may result in a fall and serious injury.
This product must be grounded. If it should malfunc°
tion or break down, grounding provides a path of least
resistance for electric current to reduce the risk of ebc°
tric shock, This product is equipped with a cord having
an equipment-grounding conductor and a grounding
plug, Plug the power cord into a surge suppressor,
and plug the surge suppressor into an appropriate
outlet that is propedy installed and grounded in
accordance with aH JocaJcodes and ordinances.
Important: The treadmill is not compatible with
GFCl-equipped outJets.
This product is for use on a nominal 120-volt circuit,
and has a grounding plug that looks like the plug illus-
trated in drawing 1 below, A temporary adapter that
looks like the adapter illustrated in drawing 2 may be
used to connect the surge suppressor to a 2-pole
receptacle as shown in drawing 2 if a properly
grounded outlet is not available,
_rounded Outlet Box
Suppressor
"_ Grounding Pin
Grounding
Grounded Outlet Grounding Plug"_
2
_rounded Outlet Box
Adapter
Metal Scrlw_ . _Surge Suppressor
The temporary adapter should be used only until a
properly grounded outlet (drawing 1) can be installed
by a qualified electrician,
The green-colored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover,
Whenever the adapter is used it must be held in place
by a metal screw, Some 2-pote receptacle outlet box
covers are not grounded. Contact a quaJified elec-
trician to determine if the outJet box cover is
grounded before using an adapter.
8