Filter
Top Products
7
2
. Attach six Base Pads (125) (only four are shown) to the
b
ottom of the Base (131) with six 1” Tek Screws (126).
With the help of another person, carefully tip the treadmill
down so the Base Pads (125) are resting on the floor.
131
125
125
125
1
26
126
126
2
3. Attach a Wheel (136) to the right side of the Base (131)
with a Wheel Bolt (134) and a Wheel Nut (135) as shown.
Attach a Wheel (not shown) to the left side of the Base
(131) in the same way.
136
135
134
131
4. Attach the Latch Assembly (110) to the Left Upright
(111) with the two 3/4” Screws (33).
Be careful not to
overtighten the Screws. Note: It may be necessary to
remove the Screws from the Left Upright before begin-
ning this step.
110
111
33
3
4