Filter
Top Products
ASSEMBLY
T
o hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly
requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of
the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with
high-performance lubricant. During shipping, lubricant may be transferred to the top of the walking belt or the
shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top
of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires the included allen wrenches and your own phillips screwdriver ,
wire cutters , and adjustable wrench .
For help identifying assembly hardware, see the drawings below. Note: If a part is not found in the part bags,
check to see if the part has been preattached.
1. With the help of a second person, carefully tip the tread-
mill onto its left side.
Partially fold the Frame (21) so that
the treadmill is more stable.
Do not fully fold the tread-
mill until it is completely assembled.
Identify the Left Upright (111) and the Right Upright (119);
the indicated brackets on the Uprights will overhang to-
ward the center of the treadmill. Feed the Wire Harness
(118) into the lower end of the Right Upright, and pull the
Wire Harness out of the hole in the bracket on the Right
Upright. Note: There may be a tie on the Wire Harness to
help you pull it out of the hole.
Attach the Right Upright (119) to the right side of the
Base (131) with two Upright Bolts (133) and two 3/8” Star
Washers (132).
Do not tighten the Upright Bolts yet.
Be careful not to damage the Wire Harness (118).
Attach the Left Upright (111) to the Base in the same
way. Note: There is not a wire harness on the left side.
21
118
Brackets
111
131
1
3/8” Star
Washer (132)–4
1/2” Screw (52)–1
L
3/4” Screw (33)–7
1/4” Star Washer
(93)–8
Washer (122)–4
W
1” Tek Screw (126)–6
1/4” x 3 1/2” Bolt (123)–4
5/16” x 1” Bolt
(113)–4
1/4” x 1” Bolt
(117)–4
Wheel Nut (135)–2
3
3/8” x 3 1/2” Bolt (121)–2
Upright Bolt (133)–4
Wheel Bolt (134)–2
6
119
132
133