Filter
Top Products
8
2. Attach two Base Feet (81) to the base of the
Uprights (85) in the indicated locations with two
#8 x 1" Tek Screws (82). Note: One replacement
B
ase Foot may be included. Use the Base Foot to
replace any Base Foot that becomes worn.
85
81
82
82
2
3. With the help of a second person, carefully tip
the treadmill onto its other side as shown.
Partially fold the Frame (55) so that the treadmill
is more stable. Do not fully fold the Frame
until the treadmill is completely assembled.
Insert the other Base Extension (97) into the in-
dicated bracket on the base of the Uprights (85).
Attach the Base Extension (97) with two 5/16" x
2" Bolts (87), two 5/16" Star Washers (110), and
two 5/16" Base Extension Nuts (91) as shown.
Firmly tighten the Bolts.
87
110
85
91
97
55
3
4. Attach two Base Feet (81) to the base of the
Uprights (85) in the indicated locations with two
#8 x 1" Tek Screws (82).
With the help of a second person, carefully tip
the treadmill so that all the Base Feet (81) are
resting on the floor and the Uprights (85) are in
the vertical position.
81
82
82
85
4
81
81
Bracket