Filter
Top Products
22
HOW TO USE A CUSTOM PROGRAM
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page
1
6.
2. Identify yourself as user 1 or user 2.
See step 2 on page 16.
3. Select a custom program.
To select one of the four custom programs, press
the Program button repeatedly. When a custom
program is selected, the name of the program
(CUSTOM: 1, CUSTOM: 2, CUSTOM: 3, or CUS-
TOM: 4) will appear on the screen.
In addition, the maximum speed and incline set-
tings of the program, the program duration, and a
profile of the speed settings of the program will ap-
pear. Note: If the workout time is only three
minutes, see HOW TO CREATE A CUSTOM
PROGRAM on page 21.
4. Start the walking belt.
Press the Start button to start the program. A mo-
ment after you press the button, the treadmill will
automatically adjust to the first speed and incline
settings that you programmed previously. Hold the
handrails and begin walking.
Each custom program is divided into several one-
minute segments. One speed setting and one in-
cline setting are programmed for each segment.
Note: The same speed setting and/or incline setting
may be programmed for consecutive segments.
The custom program will function in the same way
as a preset program (see step 4 on page 18).
I
f desired, you can redesign the program while
using it. To change the speed setting or the in-
c
line setting for the current segment, simply
press the Speed or Incline buttons. When the cur-
rent segment ends, the new setting will be saved in
memory. To increase the length of the program,
first wait until the program is completed. Then,
press the Start button and program speed and in-
cline settings for as many additional segments as
desired. When you have added as many segments
as desired, press the Stop button twice. To de-
crease the length of the program, press the Stop
button twice at any time before the program is
completed.
5. Select a display mode and follow your progress
with the exercise information on the screen.
See step 6 on page 17.
6. Measure your heart rate if desired.
See step 7 on page 17.
7. Turn on the fan if desired.
See step 8 on page 17.
8. When you are finished exercising, remove the
key from the console.
See step 9 on page 17.