Filter
Top Products
12
13. Insert the pulse wires and the Upright Wire (not
shown) into the Handrails (92, 93) as you set
the console assembly on the Handrails.
Attach the console assembly with four 5/16" x
5/8" Screws (4) and 5/16" Star Washers (12).
Start all four Screws, and then tighten them.
Tighten the four 3/8" x 1" Screws (6).
13
12
4
12. With the help of a second person, hold the con-
sole assembly near the Uprights (90, 99).
C
onnect the Upright Wire (88) to the console
wire. See the inset drawing. The connectors
s
hould slide together easily and snap into
place. If they do not, turn one connector and try
again. IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER.
Next, connect the two pulse wires. Then, re-
move the wire tie from the Upright Wire (88).
C
onsole
Assembly
Console
Wire
Console
Assembly
12
Pulse Wires
Pulse Bar
Assembly
99
90
88
93
92
6
6
12
4
Console
Wire
Wire
Tie
88