ProForm 2400 Treadmill User Manual


 
10
7. Remove the four 3/8" x 1" Flat Head Screws
(15) and 3/8" Star Washers (14) from the Left
and Right Uprights (90, 99).
Orient the Handrail Brackets (89) so that the
indicated holes are in the positions shown.
Insert the Upright Wire (88) through the left
Handrail Bracket.
Attach the Handrail Brackets (89) to the
Uprights (90, 99) with the four 3/8" x 1" Flat
Head Screws (15) and 3/8" Star Washers (14)
that you just removed. Tighten the Screws.
15
89
Hole
99
14
88
15
14
90
89
7
Hole
6. Remove the four 3/8" x 1" Screws (6) and 3/8"
Star Washers (14) from the Handrail Brackets
(89). Then, remove the Handrail Brackets from
the Left and Right Handrails (92, 93). The
S
crews and Star Washers will be used in
step 8.
6
1
4
6
6
1
4
89
8. Identify the Left and Right Handrails (92, 93).
Hold the Left Handrail (92) near the Left Upright
(90). Insert the Upright Wire (88) into the large
hole in the bottom of the Left Handrail and out of
the front of the Left Handrail.
Slide the Left Handrail (92) onto the left Handrail
Bracket (89), and attach the Left Handrail with
two of the 3/8" x 1" Screws (6) and 3/8" Star
Washers (14) that you removed in step 6. Do
not tighten the Screws yet.
Attach the Right Handrail (93) as described
above. Note: There is not a wire in the Right
Upright (99).
92
14
6
14
93
6
88
89
14
89
14
6
8
6
14
6
14
89
6
99
90
92
93