Filter
Top Products
Product Features 23
Product Display Description
All ERROR LOG Displays any error codes that may
have been detected by the software.
All ODOMETER The odometer value correlates to the
type of Precor product and the
standard of units, U.S. or Metric,
selected in the programs.
• Treadmill shows the number of
cumulative miles or kilometers
logged to date.
• EFX or AMT shows the number of
total strides logged to date.
• Cycle shows the number of total
revolutions logged to date.
• Climber indicates the number of
floors climbed.
Error Log
Quick access to the informational display is available if error
messages appear on the display and have been recorded in
the error log. This feature is usually reserved for service
personnel.
To view the error log:
1. At the Precor banner, press and hold RESET for 4
seconds.
2. If DIAGS - INFORMATION DISPLAY or
ERROR LOG appears, then press OK.
A log of errors will appear.
3. If STOP KEY or STUCK KEY appears, then no
errors are logged,
When you release the key, the Precor banner returns.