Filter
Top Products
Assembling the Exercise Bike 19
8. Insert the two upright support mounting screws through
the openings on the support and into the screw holes on
the body assembly. Tighten the mounting screws
completely using a ³₈-inch hex wrench.
Figure 8: Bolting the upright support into place
Note: If you are not installing Cardio Theater equipment
on the console, you do not need to complete the following
two steps.
9. Reposition the left side cover on the body assembly, then
reattach and tighten the #10 x 1-inch self-tapping screws
holding it in place.
10. Repeat the previous step to reinstall the rear and top
covers.