Filter
Top Products
page 18
COMMERCIAL PRODUCTS DIVISION
Diagram 16
21
Raise or
lower the
deck.
15. Adjust the rear deck. Diagram 16. To raise the rear deck, situate yourself
next to the adjustable rear foot. Ask an assistant to lift the rear of the tread-
mill slightly while you turn the adjustable rear foot clockwise. Turning the rear
foot counterclockwise lowers the unit.
CAUTION: The treadmill requires a dedicated, grounded circuit. A 20 amp
dedicated circuit is recommended. Make sure that no other product or
machine uses the same circuit as the treadmill.
16. Connect the power cord. Unwrap the power cord from the packing material
and plug it into its receptacle on the front panel. Make sure that the ON/OFF
(I/O) power switch is placed in the OFF (O) position and connect the power
plug to a dedicated, grounded circuit.
TURNING THE UNIT ON AND OFF
Use the ON/OFF (I/O) power switch, located on the front panel, to turn the unit
ON and OFF.
To complete the installation of the treadmill, continue with
Checking the Alignment
of the Running Belt.
Adjustable
rear foot
Hand holds
on rear end
caps