Filter
Top Products
page 11
7. Position the electronic console over the handrail
clamp and plug the connector into the receptacle. See
Diagram 8. Do not force the connection. The connec-
tor is designed to engage in one direction only. A tab
on the connector and a slot on the receptacle help you
determine the proper alignment.
8. Slide the electronic console onto the mounting
bracket. It should "click" into place as you slide it
toward the rear of the treadmill.
9. Attach the C clips around the handrail as shown in
Diagram 5 on page 8. Position the slight protrusion on
the C clip around the reed switch wire and micro-
adjustment knob cable. Squeeze the C clips together
to close them and secure the wires in place.
10. With the electronic console successfully assembled,
continue to
InstalIing the Mounting Pads.
Diagram 8