Filter
Top Products
Page 12
b. 723e Handrail. Take the four small bolts (E) from the hardware kit.
Position the handrails as shown in Diagram 12. Slide one handrail into
the mounting tube at a time so that the foam wrap on the handrail
touches the console. See Diagram 12. Once both handrails are in
place, insert the bolts and tighten firmly using the hex key (J). See
inset in Diagram 12.
Diagram 12
Install handrail for the 723e only.
Bolt
Console
Lower handrail
Upper handrail
Ribbon cable connection
Tighten bolts
Diagram 13
Install electronic console (723e only).
Electronic console
8. Install Electronic Console. (Diagram 13 and 14) To attach the electronic
console display to the handrail console, take the following steps:
a. Plug the slotted reed switch cable connector into its receptacle on the
underside of the electronic console display.
b. Hold the electronic console display above the handrail console while
you gently feed any excess cable back through the hole in the handrail
console.
Phillips-head screws
Handrail console