Filter
Top Products
E 78 E 79
1. Start the software.
2. If the receiver is in the Time of day display scroll up or down until
CONNECT is displayed.
3. Place the receiver less than 10 cm/ 4" from the loudspeaker.
4. Activate the heart rate monitor connection function of the software.
Do not move the receiver during the data transfer.
5. The receiver automatically starts to upload the information as UpLink
and COM appear and you will hear a chirping sound while information
is transferred to the receiver. The receiver automatically returns
to the Time of day display after data transfer.
If the data transfer was unsuccessful bring the receiver closer to the
loudspeakers or turn the volume level of the loudspeakers up.
Interrupt the data transfer from the computer by pressing the stop
button during data transfer. CONNECT is displayed.
To be able to upload the settings from Polar Precision Performance
software via Polar Uplink, you need a personal computer with a sound
card (compatible with SoundBlaster™) and dynamic loudspeakers or
earphones.
Interrupt the data transfer to the computer by pressing the stop
button during data transfer. CONNECT is displayed.
To be able to transfer the recorded training information via IR
communication and to analyse it with Polar Precision Performance
software (version 3.0 or later), you need the Polar IR Interface, unless
there is an IR data port and Windows
®
95 operating system on your
computer.
Your Polar S710 offers you the option of preparing your settings with Polar
Precision Performance software. You are also able toset following functions
with the software:
• a user ID, user name or logo for easier receiver recognition in
multi-user situations
• the heart touch function to show the current heart rate limits, store a
lap time or swap the display options during your exercise
• names and alarm times for 7 reminders
• options lock function on or off
You may upload settings from a computer to a wrist receiver either via IR
communication or via audible Polar Uplink. For IR communication please
see the previous chapter and for the Polar Uplink communication proceed
as follows:
Uploading Settings from Computer
S710 man GBR/B kopio.pm6 8/3/01, 14:3478-79