Filter
Top Products
FIGURE 8
1/2X3"
3/8 X 2-3/4"
STEP 8:
3/8X4"
¯
LOOSELY assemble the TOP BOOM (1) to the UPRIGHT FRAME (2) using one 1/2 X 2-1/2" BOLTS (34), one 1/2 X 3" BOLT
two 1/2" WASHERS (43), and one 1/2" LOCK NUT (44) as shown in FIGURE
¯
LOOSELY assemble the TOP BOOM (1) to the UPRIGHT FRAME (2) using one 3/8 X 2-3/4" BOLTS (32) and one 3/8" LOCK
(42) as shown in FIGURE
¯
LOOSELY assemble the TOP BOOM (1) to the UPPER CROSS SUPPORT (7) using two 3/8 X 4" BOLTS (33), four 3/8" WASHERS
(40) and two 3/8" LOCKNUTS (42). See FIGURE
¯ Insert one 3 X 2" END CAP (19) into the end of the TOP BOOM (1). See FIGURE
*
SECURELY TIGHTEN A~LL LOOSE CONNECTIONS MADE UP TO TI-[IS POEN-T!
FIGURE
3/8" LOW HEIGHT ()[[~)..
ii
t3/8X2-3/4"
STEP 9:
¯ Slide two VfiXVfL CAPS (27) over the LAT BAR SUPPORT (8) as sho~a in FIGURE
¯ SECURELY assemble the LAT BAR SUPPORT (8) to the TOP BOOM (1) using one 3/8 X 2-3/4" (32) and one 3/8" LOWHEIGHT
NUT (41). See FIGURE
1/2 t 1/2 I 1/2 I 1/2 I 1/2 1 ~/2 I
5
6
0 1 2 3
4
,, I i [ l I t
’
8