Filter
Top Products
FIGURE 12
3/8 X 2-3/4"
STEP 12:
¯ Route the end of the second CABLE (18) through the slot of the UPRIGHT FRAME (2) then SECURELY assemble one 4-1/2"
PULLEY (17) to the UPRIGHT FRANfE (2) using ~vo 3/8 X 2-3/4" BOLTS (32), two 3/8" FLANGE SPACE’2~,S (39), two 3/8"
ERS (40), and two 3/8" LOCKNUTS (42). (NOTE: The C.~BLE (18) should be routed between the pulley and the retaining
shown in FIGURE 12.)
FIGURE 13
/
/
/
STEP 13:
Wrap the CABLE (18) around one 3-1/2" PULLEY (16) and LOOSELY assemble it to the 3/16 X 1-3/4 X 5-1/4" PLATES (28) using
3/8 X 2" BOLT (31), m’o 3/8" WASHERS (40), and one 3/8" LOCK,NUT (42). See FIGURE
11