Filter
Top Products
STEP 2:
¯ Attach two NON-SKID STRIPS (24) to the FOOT
PLATE (6) as shown in FIGURE
FIG
FIGURE 3
STEP 3:
¯
Insert four 2" SQ. ENiD CAPS (22) & t~vo 3 X 2" END CAPS (19) to the ends of the FRONT UPRIGHTS (5) as shown in FIGURE
¯
Assemble two 13-1/2 X 1-1/2" RUBBER STRII~S (25) to the bottom of the FRONT UPRIGHTS (5) as shower in FIGURE
¯
LOOSELY assemble the FRONT UPRIGHTS (5) to the UPRIGHT SUPPORT (4) using four 1/2 X4" BOLTS (37), four 1/2"’ WASHERS
and four 1/2" LOCKNLrTS (44) as shown in FIGURE
I I/2
] 1/2 ] I/2 ] I/2
I 1/2
[ I/2
1
0
1
, [ , 2
3
, [
4
5
6
4