Filter
Top Products
EN
7
SWITCHING BETWEEN MAIN MODES
There are 6 main modes. Each main mode displays
a banner screen telling you which mode you are
entering. After 1 second the banner screen is
automatically replaced by the main mode screen. Press
MODE to switch between the main modes:
PROMPT SCREENS
In some Main Mode and Setting displays a prompt
screen will appear when you press SET. Press and hold
SET if you wish to enter and proceed with the prompt
action or press MODE to exit this display.
The real-time clock is the default display for the watch.
To set the real-time clock:
The modes are described in the sections that follow.
NOTE You cannot run the Timer or Stopwatch at the
same time. If you have been using the Timer and do not
reset it after use, you will not be able to view the main
mode stopwatch screen and vice-versa.
MODE
BANNER MAIN
MODE
MODE BANNER MAIN
MODE
CLOCK
STOP-
WATCH
USER
PROFILE
TIMER
MEMORY
ALARM
SCREEN
DISPLAY
PROMPT
SCREEN
PROMPT
ACTION
CLOCK / ALARM
/ USER PROFILE
MAIN MODE
TIMER / STOP-
WATCH MAIN
MODE
TIMER / STOP-
WATCH SETTING
MODE
MEMORY MAIN
MODE
Enter Clock / Alarm
/ User Setting
Mode
Reset Timer /
Stopwatch
Enter Timer /
Stopwatch Setting
Mode
Delete total calorie and
fat burn or individual
memory, i.e., MEM.1
CLOCK MODE
SETTING THE CLOCK
SE120_M_EN_R7 2006.4.12, 10:53 AM7