Filter
Top Products
24
9. ADJUSTMENT ON THE WEAPON
The riflescope is equipped with tactical multi-
revolving reticle adjustment mechanism. Screws of
the adjustment mechanism are terminated with
knobs (5, Fig.1) with the horizontal and vertical
scales, which allow precise determining of the clicks
and turns of the knob(s).
Adjustment is performed as follows:
1) Mount the riflescope to the weapon;
2) Find a target or choose a point of aim;
3) Lock the weapon on the shooting stand;
4) Aim the weapon at the target using iron
sights installed on the weapon (if it is possible).
At this stage you can use laser boresighting
riflescope (LBS, to be purchased separately),
which is inserted into the barrel of the weapon
and points to the geometrical point of the barrel
extension:
5) By rotating the windage/elevation
adjustment knobs, achieve overlapping of the
cross hair with the aiming point indicated by
the iron sight or LBS;
6) Take the weapon from the stand and remove
LBS;