Filter
Top Products
21
The riflescope NC 3-12х50 can be supplied with
fixation mounts for exact weapon model or without
them depending on the particular order.
6. BATTERY INSTALLATION
The riflescope operates with one CR2032 battery.
Be sure that the battery is brand new and is installed
with correct polarity (“–“sign goes inside the battery
compartment).
To install the battery, unscrew the battery
compartment cover (4, Fig 1), insert the battery
observing polarity, and screw the cover back.
7. RETICLE ILLUMINATION
The reticle illumination is digitally controlled by the
switch (6, Fig.1). A short pressing of this switch sets
the reticle to the illumination position, which was set
the last time when the riflescope was used.
The reticle illumination is adjusted by pressing and
depressing the switch. You can choose among seven
possible illumination levels. If the battery is
discharged, the reticle will blink being turned on.