Filter
Top Products
22
The reticle illumination turns off automatically after
30 minutes from the last pressing of the switch.
Before turning off, the reticle blinks during several
seconds. In order to turn the reticle illumination off
manually, it is necessary to press and hold the switch
during 2 seconds.
8. USING THE NC 3-12x50 RIFLESCOPE
Operating procedure:
1) Mount the unit on the corresponding landing
place of the weapon and install the battery;
2) Open objective and eye protection caps;
3) Achieve maximum sharpness of the reticle
image by rotating the eyepiece (3, Fig.1);
4) Check the riflescope for correct parallax
adjustment. To do so, chose a target for aiming
and swing your eye from side to side relatively
to the eyepiece. If the reticle displaces from the
aiming point, rotate the knob (7, Fig.1) and
repeat the action. The riflescope is free from
parallax, if the center of the reticle is not
displaced relatively to the target with eye
swinging;
5) Rotate magnification adjustment ring (8,
Fig.1) to achieve the required magnification;