Filter
Top Products
23
6) If necessary, turn on the switch (6, Fig.1) to
get the reticle illuminated. You should see the
red illuminated outline of the reticle. Switch (6,
Fig.1) also controls the reticle brightness.
Riflescope is ready for operation.
After operation:
1) Switch off the illumination – by returning
the switch (6, Fig.1) to OFF position;
2) Close objective and eyepiece caps;
3) Remove the riflescope from the weapon if it
is required by conditions for transportation.
WARNING:
If you are store the riflescope for long period of
time without operation remove the battery from the
battery compartment to prevent battery leakage.