Filter
Top Products
37
Lamp replacement
ARC HID Lamp
All lamp replacements for ARC systems must be performed by
the Light & Motion service department.The front bezel is not
designed to be rotated or removed. Tampering or removing
the front bezel will void the warranty. If for any reason the
front bezel is removed or the glass port breaks, DO NOT
TOUCH the exposed lamp. Immediately unplug the light head
from the battery to minimize the risk of electric shock. Return
the light head to Light & Motion for repair. If the lamp should
fail, contact the Light & Motion service department to
schedule lamp replacement.
All Light & Motion ARC HID bicycle lighting systems use
Solarc
TM
Technology.
Solo Logic 13w Halogen Lamp
To obtain replacement lamps contact your local Light &
Motion Authorized Dealer.Disconnect the light head from the
battery and allow lamps to cool before removing. Orient the
light head facing upward and remove the bezel by rotating it
counterclockwise.To remove the lamp from the socket, grasp
firmly with your thumb and index finger and pull straight out.
Replace lamp by aligning pins and pressing the new lamp gently
into the socket until it reaches the base. Re-install the bezel