Filter
Top Products
20
Installation of light head and battery
Installing light head assembly
Your Light & Motion Light head comes pre-assembled with the
bar style mount attached to the light head.
1) Determine the best location for your handle bar mount as
it relates to your specific brake/shifter bar layout. Ideally, the
bar mount should be attached to the right and as close to the
stem as possible.
2) After determining which bar spacer(s) to use (it may be
necessary to cut spacers), orient the bar mount with the
opening facing rear and the Light & Motion logo facing
forward. Securely tighten with the thumb screw.
3) The light head is then secured to the bar mount by a ball
detent. Slide the base of the light head onto the bar mount
until it seats securely.
4) Once flush to front of mount, it will “lock” into place.
5) To remove press down on the front edge of the light head
mount and press backwards.