Filter
Top Products
28
Mounting Cabeza Light Head
The Cabeza mount is designed to be mounted on any
standard, vented bicycle helmet. Position the base of the light
head on top of the helmet, in the middle and slightly forward
of center. Slide the hook and loop strap down through the
proper vent, back up through the opposing vent and through
the slot in the base of the light head. Pull the strap tight and
slide it back down the vent and affix it to the “loop” side of
the strap (inside the helmet). Plug the light head cable into the
top of the battery by aligning the arrow on the cable with the
dot or arrow on the battery.The battery pack is designed to
be carried without the bomber strap in a jersey pocket or
hydration pack. Hint: Running the power cord through one of
the back vents of your helmet before connecting it to your
battery will keep the cord from sliding from side to side.
CAUTION! - NEVER attach a Cabeza (helmet) mounted
light to a frame mounted battery.