Filter
Top Products
36
Charging the Vega
The Vega comes with its own proprietary Light & Motion
universal input charger which will work with any wall current
from 90-260v. WARNING: Using any other charger will
void the warranty and could be extremely dangerous. To
charge the Vega, plug the charger pack into the appropriate
wall socket, then remove the charger port plug from the
bottom of the light. Insert the male jack into the charger port
until it stops. The green LED will blink when the battery is
receiving a charge. After approx. 2 hours the green LED will
glow steadily indicating the battery is fully charged. The Vega
can be left on the charger indefinitely without harming the
battery.