Light & Motion 2005 Bicycle Accessories User Manual


 
29
ARC and ARC Li-ion HID light operation
The Light & Motion ARC HID lights all have one switch on the
back of the head that controls power. Pushing it quickly twice
turns the light on; the light starts in the 13w high mode.The
light takes approximately 20 seconds to come to full strength;
the green LED will be on. Pushing the button again causes the
light output to be reduced to 10w.The green LED on the back
of the light head will then go into a slow flash mode.To turn
the light off you must press and hold the button for 3 seconds.
ARC Li-ion Battery Discharge Protection:
The ARC Li-ion HID incorporates a battery discharge
protection circuit. If the battery becomes discharged, the light
head will automatically go into an ultra-low mode and the light
will dim significantly. The green LED will also begin to flash
very rapidly for one minute.After exactly one minute the light
head will then automatically shut down. If the light head shuts
down, it can not be restarted until the battery is recharged.