Filter
Top Products
17
Charging the battery using the NiMH Turbo Charger.
Always fully charge your battery before its first use. Batteries
are shipped partially charged and must be fully charged to
achieve the proper run time.
Note: NiMH batteries require approximately 5-10 charge and
discharge cycles to reach full capacity. Until the battery
reaches full capacity your run times may be less than stated.
1) Begin by plugging the power cord into the charger and then
into the appropriate wall socket.
2) Attach the battery to the NiMH Turbo Charger by aligning
the arrow on the socket from the charger with the yellow dot
(7.2v NiMH) or arrow on the (10.8V NiMH) battery.
3) Once the battery is attached to the charger, a yellow LED
will illuminate on the right side of the charger indicating the
battery is receiving a charge.
4) After the battery has received a full charge, a green LED will
illuminate on the left side of the charger indicating the battery
is fully charged.