Filter
Top Products
32
U
SING THE START MESSAGE SETUP
This configuration allows for a custom start-up message to be displayed before the default “Select
Workout or Press Quick Start” message. The custom message can contain up to 52 characters.
CREATING A START MESSAGE
After entering the Manager’s Configuration, scroll to the START MESSAGE SETUP option and press
ENTER. Use the SPEED ARROW keys to select an available letter, number or special character. Use
the INCLINE ARROW keys to move forward or backward throughout the message, or insert spaces,
one character at a time. The current character will blink until the position is moved with the INCLINE
ARROW keys.
SAVING A
START MESSAGE
To save the START MESSAGE, press ENTER. “MESSAGE SAVED” will appear in the message cen-
ter confirming the message has been saved. To exit the start message setup without saving, press
the clear key twice. “MESSAGE NOT SAVED” will appear in the message center confirming the mes-
sage has not been saved.
ERASING A S
TART MESSAGE
After entering the Manager’s Configuration, scroll to the START MESSAGE SETUP option and press
ENTER. Press enter to enter the current START MESSAGE. Press the COOL DOWN key to erase
the current START MESSAGE. “MESSAGE ERASED” will appear in the message center stating the
message has been erased.
USING THE MAXTIME
TM
SETUP
This feature allows the club to set different maximum workout durations to accomodate various traffic
flows throughout the day. The real-time clock must be correct to fully utilize this feature. Refer to
Section 1.2 Setting the Clock.
After entering the Manager’s Configuration, select the MAXTIME SETUP option. The MESSAGE
CENTER displays the statement “MAXTIME CONTROL OFF” and then displays a maximum workout
duration value. The default value is 60 minutes, and it can be changed with the INCLINE or SPEED
ARROW keys. This value is always in effect unless the MaxTime
TM
control feature is turned on.
To turn the feature on, use the INCLINE or SPEED ARROW keys, and switch the setting to MAX-
TIME CONTROL ON. Then, press ENTER.
The MESSAGE CENTER displays a “peak duration” value, which is the maximum possible workout
duration, in minutes, during high-traffic hour for fitness clubs. Use the ARROW keys to increase or
decrease the displayed value, and press ENTER. The MESSAGE CENTER then displays a “non-
peak duration” value, which is the maximum possible workout duration all other times. Use the
ARROW keys to increase or decrease the displayed value, and press ENTER.
The MESSAGE CENTER then displays a “peak 1” time period in hours and minutes. This is the peri-
od during which the peak workout duration value is in force. Use the TIME ARROW keys to change
the hours, and use the INCLINE ARROW keys to change the minutes. Press ENTER. The MES-
SAGE CENTER then displays the “peak 1” duration value, which is the amount of time in minutes
that the peak period remains in force. Using the ARROW keys, change the value, and press ENTER.
The MESSAGE CENTER then displays a “peak 2” time period. Repeat the steps described in the
preceding paragraph to set up a second peak time.