Filter
Top Products
31
5.2 CONFIGURATION
SETTINGS
CONFIGURATION FACTORY
SETTING DEFAULT DESCRIPTION
LANGUAGE ENGLISH The language of the MESSAGE CENTER display. Choices
include Portugese, Spanish, Dutch, Japanese, Italian, French,
and German.
MAXTIME
TM
SETUP OFF This feature enables fitness club managers to set workout
duration limits during peak and non-peak hours of club traffic.
If the setup is off, no duration limits are set. See the topic
titled Using the Maximum Time Setup, which appears on the
following page.
STANDBY MODE SETUP OFF This feature enables fitness club managers to set periods at
which the treadmill automatically powers up or powers down.
See the topic titled Using the Standby Mode Setup, which
appears on the following page.
ENGLISH/METRIC UNITS ENGLISH The measurement unit type for weight, distance, and speed.
TELEMETRY ON Switching on the telemetry feature makes it possible to use the
Polar®-compatible Heart Rate Zone Training
®
exercise chest
strap for monitoring the heart rate.
SMART STOP OFF This feature is not available on this model.
MAXIMUM SPEED 10.0 (MPH) for U.S. This is the fastest speed at which the treadmill can operate.
12.0 for international
MINIMUM SPEED 0.5 (MPH) This is the slowest speed at which the treadmill can operate.
PAUSE TIMEOUT 1 (minute) This is the maximum time during which a workout can remain
in pause mode.
WATTS DISPLAY OFF (Int'l: ON) If this option is enabled, the MESSAGE CENTER displays the
Watts equivalent of the step rate.
METS DISPLAY OFF If this option is enabled, the MESSAGE CENTER displays the
METs equivalent of the step rate.
PACE DISPLAY ON This feature displays the rate of minutes per mile.
CALORIE PER HOUR DISPLAY ON (Int'l: OFF) If this option is enabled, the MESSAGE CENTER displays the
number of calories burned per hour during the workout.
DISTANCE CLIMBED DISPLAY OFF The total distance climbed, based on the incline and speed of
the treadmill.
WAX REMINDER OFF After the first 100 hours, then every 168 hours, the MESSAGE
CENTER displays, "MAINTENANCE REMINDER - CLEAN
THE NOZZLE."
ACCELERATION RATE 3 The rate at which the treadmill accelerates to the selected
speed, ranging from 1 (slowest) to 5 (fastest).
DECELERATION RATE 3 The rate at which the treadmill decelerates to the selected
speed, ranging from 1 (slowest) to 5 (fastest).
MAXIMUM INCLINE 15.0 This option changes the maximum incline grade to a value
lower than 15 percent.
START MESSAGE SETUP N/A See “Using the START MESSAGE Setup” in this section.