Filter
Top Products
y
I i ii
i I iii i
in
Cleanliness ofyour treadmill and its operation environment will keep maintenanceproblems and service calls to a
minimum. For this reason,werecommendthat the followingpreventive maintenance schedulebe followed.
AFTEREACHUSE(DALLY)
Clean and inspect, following thesesteps:
• Turnoff the treadmill with the on/off switch, then unplug thepowercord at the waftoutlet.
• Wipedown the running belt, deck, motor cover,and consolecasing with a damp cloth. Neveruse solvents, as
they cancause damageto the treadmill.
• Inspect the powercord. If the powercordis damaged,contact HorizonFitness.
• Make sure the power cordis not underneath the treadmill or in anyotherarea whereit can becomepinched or
cut.
• Checkthetension andalignment of therunning belt. Makesurethat the treadmifl belt will not damage anyother
componentson the treadmill by being misaligned.
EVERYWEEK
Clean underneaththe treadmill, following thesesteps:
• Turnoff the treadmill with the on/off switch then unplug the powercordat the waftoutlet.
• Foldthe treadmill into the upright position making sure that the lock latch is secure.
• Movethe treadmifl to a remotelocation.
• Wipe_rvacuumanydustpartic_es_r_ther_bjectsinatmayhaveaccumu_atedunderneaththetreadmi__.
• Return the treadmill to its previousposition.
EVERYMONTH- IMPORTANT!
• Turnoff the treadmill with the on/off switch, then unplug the powercordat the wall outlet.
• Inspect aft assemb!vbolts of the machine forproper tightness.
• Turnoff the treadmill and wait 60seconds.
• Removethe motorcover.WaituntilALL LEDlights turn off.
• Cleanthemotor and !owerboardarea to eliminate anylint ordust particles that mayhave accumulated.Failure
to do somay result in prematurefailure of keyelectrical components.
• Vacuumand wipe down the belt with a damncloth. Vacuumany black/white particles that may accumulate
around the unit. Theseparticles may accumulatefrom normal treadmill use.
EVERY6MONTHSOR150MILES
It is necessary_olubricate your treadmill running deck everysix months
or ]50 miles to maintain optimal performanceof your treadmill. Oncethe
treadmill reaches]50 miles, the consolewill orompt you to lubricate the
treadmill. Onlyuse lubricant providedby HorizonFitness!
..... ;AMIN
• TURNOFFTHETREADMILLwith the on/off switch, then unplug the
powercord at the waftoutlet.
• Loosen both the rear roller bolts. (For best results, place two
removable marks on both sides of the frame and note roller
position). Oncethe belt is loosened,take the bottle of lubricant
and apply it to the entire top surface of the running deck. Tighten
both rear roller bolts (matching up the marks forproperposition) to
original position. Afteryouhaveapplied inbricant, plug in the power
cord, insert thesafety key,start the treadmill and walk on the belt
for twominutes to spread the lubricant.
• Lubricate the air shockswith Teflonbased spray.
• Oncelubrication is complete, reset the console by pressing and
holding 'STOP'and Speedin' buttons for 5 seconds.
RUNNINGBELT
RUNNINGDECK
Pleasecontact HorizonFitness with questions about applying lubricant toyour treadmill