Horizon Fitness E1201 Elliptical Trainer User Manual


 
BEFORE
YOU BEGIN
24
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
ELLIPTICAL
OPERATION
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
ASSEMBLY
ELLIPTICAL
OPERATION
BEFORE
YOU BEGIN
ASSEMBLY
25
INTRODUCTION
IMPORTANT
PRECAUTIONS
ELLIPTICAL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
ELLIPTICAL
OPERATION
ASSEMBLY
You can save a workout in any of the 4 save workout locations.
At the end of your workout, the console will prompt you if you would like to save your completed workout
by scrolling SAVE WORKOUT.
If you would like to save the workout, press the SAVE WORKOUT key.
The 1 SAVED WORKOUT LED will light up. FREE or FULL will display on the console. FREE indicates that
this location is empty. FULL indicates a previously saved workout is already saved to that particular
location. You may save to either a FREE or FULL location, however if you choose to save to a FULL
location the previously saved workout will be deleted and replaced with the new workout.
Press the SAVE WORKOUT key until you have selected the desired save workout location you would like
to save your workout.
Press and hold the SAVE WORKOUT key for 5 seconds to save the workout for future use. The console will
beep 3 times if the workout is saved.
1
2
3
4
5
S AV IN G A W O R KO UT
E N T E RTA I N M E N T I N FO R M AT I O N
The Horizon Fitness iPod Docking Station is the entertainment solution for your workouts.
Various models of iPod with a dock connector can fit with the use of the included inserts.
Using your iPod Docking Station (iPod not included)
Remove the RUBBER PLUG from bottom of the DOCKING STATION.
Place the DOCK INSERT that fits your iPod model into the DOCKING STATION.
Plug in your iPod by matching the DOCK CONNECTOR PIN on the elliptical with the dock connector on
your iPod. NOTE: If you want to connect a different sized iPod, simply lift out the DOCK INSERT and
replace with a new one.
Use the IPOD CONTROLS on the bottom of the console to adjust volume and song settings.
NOTE: If you don’t want to use the speakers, you can plug your headphones into the AUDIO OUT JACK on
right of the IPOD DOCKING STATION.
Replace the RUBBER PLUG into the bottom of the DOCKING STATION when the station is not in use.
NOTE: iPod audio will not play through speakers if the AUDIO ADAPTOR CABLE is plugged in while iPod is
in the DOCKING STATION.
1
2
3
4
5
U S I N G i P o d
®
AU D IO P L AY E R
Leave RUBBER PLUG at bottom of DOCKING STATION.
To hold your MP3 player in place in the DOCKING STATION, use the UNIVERSAL MP3 PLAYER INSERT.
NOTE: Only iPod is compatible with the DOCK CONNECTOR PIN in the IPOD DOCKING STATION.
Connect the included AUDIO ADAPTOR CABLE to the AUDIO IN JACK on left of the IPOD DOCKING
STATION and the headphone jack on your CD / MP3 player.
Use your CD / MP3 player buttons to adjust song settings.
NOTE: if you don’t want to use the speakers, you can plug your headphones into the AUDIO OUT
JACK on right of the IPOD® DOCKING STATION.
Remove the AUDIO ADAPTOR CABLE when not in use.
1
2
3
4
5
U S I N G N O N - i Po d
®
MP 3 / C D P LAY E R S
iPod
®
Docking Station
Dock Connector Pin
iPod
®
Controls
Rubber Plug
iPod
®
Dock Inserts
Note: Dock insert sizes
vary for each iPod.
Universal MP3 Player
Dock Insert
Dock Insert
Audio In Jack Audio Out Jack
Speakers
Press SAVE WORKOUT key to scroll through workouts you have saved. The SAVED WORKOUT LEDs (1-4)
will light up. Only the save workout locations to which workouts have been saved will be available. If no
workouts have been saved, no saved workouts will be available.
Once you have selected the saved workout you desire, press ENTER or START to begin the workout.
NOTE: Changes made to a saved workout will not be saved unless you repeat the save workout process above.
1
2
S E L EC T IN G A S AV E D W O R KO U T
Once you have connected the iPod to the docking station, please allow up to 75 seconds for the iPod
and docking station to sync up before it will be fully functional. To adjust the volume you must use
the IPOD CONTROLS located under the docking station. NOTE: if you don’t want to use the speakers,
you can plug your headphones into the AUDIO OUT JACK on right of the IPOD DOCKING STATION.
6
E1201_Rev.1.4.indd 24-25 7/29/08 10:37:54 AM