Filter
Top Products
8
6. Press a 50mm x 75mm Inner Cap (45) into the
Right Seat Frame (3).
Attach the Right Seat Frame (3) to the Right Leg
(7) with two M10 x 80mm Bolts (86), two M10
Large Washers (94), and two M10 Nylon
Locknuts (75). Do not tighten the Locknuts yet.
Attach the Right Seat Frame (3) to the Right
Upright (5) with two M10 x 80mm Bolts (86), two
M10 Large Washers (94), and two M10 Nylon
Locknuts (75). Do not tighten the Locknuts yet.
7. Attach a Leg Bumper (49) to the Left Leg (8) with
an M4 x 25mm Self-tapping Screw (77) and an
M4 Washer (93).
Attach the Left Leg (8) to the Left Base (2) with
the indicated two M10 x 53mm Carriage Bolts
(83) and two M10 Nylon Locknuts (75). Do not
tighten the Locknuts yet.
8. Orient the Left Seat Frame (4) as shown. Make
sure the brackets are closer to the Left Leg
(8). Attach the Left Seat Frame to the Left Leg
with two M10 x 80mm Bolts (86), two M10 Large
Washers (94), and two M10 Nylon Locknuts (75).
Do not tighten the Locknuts yet.
Attach the Left Seat Frame (4) to the Left Upright
(6) with two M10 x 80mm Bolts (86), two M10
Large Washers (94), and two M10 Nylon
Locknuts (75). Do not tighten the Locknuts yet.
6
7
8
4
8
86
86
86
7
3
45
86
2
49
93
77
83
75
75
75
94
94
8
75
94
94
5
75
75
94
94
94
94
86
86
Bracket
86
86
6