Filter
Top Products
19
46. Wrap the Long Cable (62) under a 90mm Pulley
(38). Attach the Pulley and a Cable Trap (37) to
the Press Frame (14) with an M10 x 119mm Bolt
(76) and an M10 Nylon Locknut (75). Make sure
that the Cable Trap is turned to hold the Cable
in place. Do not tighten the Locknut yet.
48. Wrap the Long Cable (62) over a 90mm Pulley
(38). Attach the Pulley and a Cable Trap (37) to
the Leg Press Arm (12) with an M10 x 123mm
Bolt (98), an M10 Large Washer (94), and an
M10 Nylon Locknut (75). Make sure that the
Cable Trap is turned to hold the Cable in
place. Do not tighten the Locknut yet.
49. Wrap the Long Cable (62) around a 90mm Pulley
(38). Attach the Pulley to the Right Upright (5)
with an M10 x 45mm Bolt (78) and an M10 Nylon
Locknut (75). Make sure that the Cable Trap is
turned to hold the Cable in place.
50. Remove the M10 Nylon Locknut (75) used in step
48.
Wrap the Long Cable (62) under a 90mm Pulley
(38). Attach the Pulley and a Cable Trap (37) to
the Leg Press Arm (12) with the M10 x 123mm
Bolt (98) used in step 48, an M10 Large Washer
(94), and the M10 Nylon Locknut (75). Make sure
that the Cable Trap is turned to hold the Cable
in place.
47. Wrap the Long Cable (62) under a 90mm Pulley
(38). Attach the Pulley and a Cable Trap (37) to
the Right Seat Frame (3) with an M10 x 119mm
Bolt (76) and an M10 Nylon Locknut (75). Make
sure that the Cable Trap is turned to hold the
Cable in place. Do not tighten the Locknut yet.
46
47
48
49
50
14
75
5
37
12
75
38
62
75
75
75
38
37
37
76
75
3
38
62
98
62
12
38
37
94
78
76
62
78
38
62
98
94