Filter
Top Products
24
45. Feed the High Cable (81) through the indicated
slot in the Top Frame (17). Wrap the Cable
a
round a Small Pulley (74). Attach the Small
Pulley to the Top Frame with an M10 x 45mm
B
olt (140) and an M10 Nylon Locknut (153).
45
46. Feed the High Cable (81) through the Top Frame
(17).
See the inset drawing. Insert the Cabling Rod
(175) into the left Swivel Bracket (31) and the Top
Frame (17). Attach the Cabling Rod to the High
Cable (81). Then, pull the Cabling Rod and the
Cable out of the Swivel Bracket. Make sure that
the Cable is under the indicated rod.
Wrap the High Cable (81) around a Small Pulley
(74). Attach the Small Pulley to the Top Frame
with an M10 x 45mm Bolt (140) and an M10
Nylon Locknut (153).
46
140
S
lot
81
153
74
175
17
17
31
140
Rod
153
81
81
74
31
Rod
17