Filter
Top Products
22
40. Wrap the High Cable (81) around a Small Pulley
(74). Attach the Small Pulley to the Top Frame
(
17) with an M10 x 45mm Bolt (140) and an M10
Nylon Locknut (153).
4
0
140
41. Feed the High Cable (81) through the indicated
slot in the Top Frame (17). Wrap the Cable
around a Small Pulley (74). Attach the Small
Pulley to the Top Frame with an M10 x 45mm
Bolt (140) and an M10 Nylon Locknut (153).
41
140
Slot
81
17
42. Wrap the High Cable (81) over a Small Pulley
(74). Attach the Small Pulley, a Small Cable Trap
(93), and two Half Pulley Guards (91) to the indi
-
cated bracket on the Weight Carriage Frame (18)
with an M10 x 48mm Bolt (125) and an M10
Nylon Locknut (153). Make sure that the Cable
Trap and the Half Pulley Guards are oriented
as shown.
42
125
153
91
91
18
Bracket
81
93
74
153
74
17
8
1
153
74