Filter
Top Products
23
43. Wrap the High Cable (81) under a Small Pulley
(74). Attach the Cable, a Small Cable Trap (93),
a
nd two Half Pulley Guards (91) to the second
hole from the top of the “U”-bracket (158) with an
M
10 x 48mm Bolt (125) and an M10 Nylon
Locknut (153). Make sure that the Cable Trap
and the Half Pulley Guards are oriented as
shown.
4
3
125
44. Wrap the High Cable (81) over a Small Pulley
(74). Attach the Small Pulley, a Small Cable Trap
(93), and two Half Pulley Guards (91) to the indi-
cated bracket on the Weight Carriage Frame (18)
with an M10 x 48mm Bolt (125) and an M10
Nylon Locknut (153).
Make sure that the Cable
Trap and the Half Pulley Guards are oriented
as shown.
158
74
91
91
91
81
81
74
18
153
125
93
93
44
153
91