Filter
Top Products
8
6. Set the Left Upright Spacer (87) on the Base
(95). Have a second person hold the Left
Upright (85) near the Base. Hold a Bolt Spacer
(25) inside the lower end of the Left Upright.
Next, insert a 3/8" x 4 1/2" Bolt (6) with a 3/8"
Star Washer (10) into the Left Upright and the
Bolt Spacer. Repeat this step with a second
Bolt Spacer (25), 3/8" x 4 1/2" Bolt (6), and
3/8" Star Washer (10). Then, set the Left
Upright in the Left Upright Spacer.
Partially tighten the 3/8" x 4 1/2" Bolts (6); do
not fully tighten the Bolts yet.
With the help of a second person, tip the tread-
mill so that the Base (95) is flat on the floor.
87
85
6
95
25
6
5. With the help of a second person, carefully tip
the treadmill onto its right side. Partially fold the
Frame (57) so the treadmill is more stable; do
n
ot fully fold the Frame yet.
A
ttach a Base Foot (93) to the Base (95) in the
location shown with a #8 x 1" Tek Screw (4) and
a Base Foot Spacer (11). Then, attach another
Base Foot (93) with only a #8 x 1" Tek Screw (4).
Attach a Wheel (96) with a 3/8" x 2" Bolt (5) and
a 3/8" Nut (9). Do not overtighten the Nut; the
Wheel must turn freely.
5
9
5
57
5
9
93
4
93
96
11
4
10
7. Set the console assembly face down on a soft
surface to avoid scratching the console assem-
bly. Identify the Right Handrail (105). Hold the
Right Handrail near the console assembly.
Next, insert the console wire through the indi-
cated holes in the Right Handrail (105) as
shown.
7
105
Console Wire
Holes
Console
Assembly