Filter
Top Products
11. Identify the Left Accessory Tray (112) and the
Right Accessory Tray (116). Attach the Left
Accessory Tray and the Right Accessory Tray
to the console assembly with eight #8 x 1/2"
Screws (2).
2
11
2
Console
A
ssembly
116
112
12. Have a second person hold the console assem-
bly near the Uprights (85, 86).
Connect the Upright Wire (97) to the console
wire extending from the console assembly. See
the inset drawing. The connectors should
slide together easily and snap into place. If
they do not, turn one connector and try again. IF
THE CONNECTORS ARE NOT CONNECTED
PROPERLY, THE CONSOLE MAY BE DAM-
AGED WHEN THE POWER IS TURNED ON.
Remove the wire tie from the Upright Wire (97).
Insert the excess wire into the Right Upright (86)
as you set the console assembly on the
Uprights. Be careful not to pinch any wires.
Console
Assembly
12
86
97
Console
Wire
85
Console
Wire
97
Wire
Tie
13. Attach the console assembly to the Uprights
(85, 86) with four 3/8" x 1 1/4" Bolts (7) and four
3/8" Star Washers (10). Start all four Bolts be-
fore tightening any of them.
See steps 4 and 6. Fully tighten the four 3/8" x
4 1/2" Bolts (6).
Console
Assembly
13
86
10
10
7
7
10
7
7
85
10
10