Filter
Top Products
21
THE INFORMATION MODE
The console features an information mode that keeps
t
rack of the total distance that the walking belt has
moved and the total number of hours that the treadmill
h
as been used. The information mode also allows you
to select miles or kilometers to measure distance, and
to turn on and turn off the display demo mode.
To select the information mode, hold down the Stop
button while inserting the key into the console and then
release the Stop button. When the information mode is
selected, the following information will be shown:
The Time display will show
the total number of hours the
treadmill has been used.
The Distance display will
show the total number of
miles or kilometers that the
walking belt has moved.
Press the Stop button again to view the following infor-
mation.
An “E” for English miles or an
“M” for metric kilometers will
appear in the Incline/Pulse
display. Press the Speed in-
crease button to change the
unit of measurement if de-
sired.
The console features a display demo mode, designed
to be used if the treadmill is displayed in a store. While
the demo mode is turned on,
the console will function nor-
mally when you plug in the
p
ower cord, switch the
reset/off circuit breaker to the
r
eset position, and insert the
key into the console. However, when you remove the
key, the displays will remain lit, although the buttons
will not function. If the demo mode is turned on, a “d”
will appear in the Calorie/Speed display while the infor-
mation mode is selected. To turn on or turn off the
demo mode, press the Speed decrease button.
To exit the information mode, remove the key from the
console.
HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the consoleʼs
stereo speakers, you must connect your MP3 player,
CD player, or other personal audio player to the con-
sole through the audio jack.
To use the audio jack, locate the audio wire and plug it
into the audio jack on the right side of the console.
Then plug the audio wire into a jack on your MP3
player, CD player, or other personal audio player.
Make sure that the audio wire is fully plugged in.
Next, press the Play button on your MP3 player, CD
player, or other personal audio player. Adjust the vol-
ume on your personal audio player or press the
Volume (VOL) increase and decrease buttons on the
console.
If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat sur-
face and not on the console.